Custom Tent Half Wall for 10ft Pop-Up Canopies

Custom Tent Half Wall that brands the front of your 10ft pop-up

You already own the canopy. From twenty feet away it still looks like every other plain tent on the row. A Custom Tent Half Wall fixes that in one afternoon. It is a 113"w x 39"h dye-sublimation printed cover that clamps to the front of a standard 10ft pop-up frame at waist height, so your logo lands right where foot traffic looks while the booth stays open and approachable above. We offer a custom 10x10 canopy option, with or without the frame, if you want to take your canopy to the next level.

Upload your artwork, we print it full color into 6 oz. 600x600 denier waterproof-coated tent fabric, and everything you need to hang it ships in the box: sewn-in velcro loops, an aluminum support pole, and two hex clamps.

What it is

A single waist-high branded barrier for the front rail of your tent. Not a full wall that closes off your booth, not a table throw that hides behind your product. The half wall spans the full 113-inch front and sits at 39 inches, the height where approaching customers make eye contact with your brand.

Who it is for

Farmers market vendors, food and beverage pop-ups, event marketers, trade show exhibitors, breweries, and community organizers running a 10x10 or 10x20 canopy who need the front of the tent to say who they are.

How it installs

The sewn-in velcro loops wrap the upper frame rail, the aluminum pole threads across the bottom to keep the 113-inch span flat, and the two hex clamps lock the pole to the tent legs at both ends. One person can do the whole thing in a single setup, no second pair of hands and no parts to source.

Why buyers choose a Custom Tent Half Wall over a full wall

• Brand the front of your 10ft tent while customers still walk right up, the half wall keeps the booth open above the print
• Full-color dye-sublimation graphics embedded into the fiber, so your logo will not crack, peel, or fade after a season outdoors
• Waterproof-coated fabric that sheds rain, set up and sell through variable weather
• Scratch-resistant surface that still looks sharp after twenty loads in and out of the van
• Aluminum support pole holds the print flat and taut across all 113 inches, no sagging center
• Sewn-in velcro loops and two hex clamps included, install today with nothing to buy separately

Fits the 10ft frame you already own

The half wall attaches to the 10ft section of any standard pop-up canopy, so a 10x10 or a 10x20 works without buying a new tent. See the full range of event print on our Print category, and if you are building out the whole booth, our custom canopy tent buyer's guide walks through turning a blank pop-up into a full brand presence.

Round out your booth

Pair the half wall with a matching custom feather banner flag to draw eyes from down the aisle, a retractable banner for the inside of the tent, or custom vinyl banners for larger signage runs.