Safety Info
Fire Rated Light Covers You Can Show the Fire Marshal
Every light cover we sell is made from a material with fire test documentation behind it. Our fluorescent light covers and magnetic light covers use backlit film tested to ASTM E84 / UL 723, our fabric light covers passed NFPA 701, and our polycarbonate light panels are rated UL 94 HB. Download the reports below.
Are Fluorescent Light Covers a Fire Hazard?
It is the right question to ask before you put anything near a light fixture, especially in a school, clinic, or office. The answer depends on the material. That is why we publish the fire test result for every material we use, so facilities teams and fire marshals can check it themselves.
Tested Materials
Backlit film, fabric, and polycarbonate each have a fire test or flammability rating on file for the exact material we buy.
Reports You Can Download
Open the test documents right on this page and attach them to a work order, a purchase request, or a fire inspection file.
Made for LED and Fluorescent Troffers
Our covers and panels are designed for standard 2x4, 2x2, and 1x4 LED and fluorescent ceiling fixtures.
Fire Test Results by Product
Find your product, see what it was tested to, and open the document.
Fluorescent Light Covers
ASTM E84 test result: Flame Spread Index 0 and Smoke Developed Index 20. ASTM E84 is often used interchangeably with UL 723. Covers rest on top of the diffuser in your fixture. Shop fluorescent light covers.
Magnetic Light Covers
Printed on the same 8 mil backlit film as our fluorescent covers, so the same ASTM E84 / UL 723 result applies to the film. Magnetic strips hold the cover to a steel fixture frame or ceiling grid. Shop magnetic light covers.
Fabric Light Covers
Passed NFPA 701 Test 1 (2023 edition) and Test 2 (2019 edition), with 0 seconds of afterflame and flaming drip. Also tested to Canada's CAN/ULC-S102.2 with a Flame Spread Rating of 0 and Smoke Developed Classification of 0. See the Test 2 and CAN/ULC-S102.2 reports. Shop fabric light covers.
Polycarbonate Light Panels
Made from Tuffak GP polycarbonate, rated UL 94 HB for flammability at our 1.5 mm (0.060 in) thickness. The sheet is also UV stabilized and impact resistant. Shop polycarbonate light panels.
Fire Safety Summary Table
One table to hand to your facilities manager.
| Product | Material | Fire Test or Rating | Result |
|---|---|---|---|
| Fluorescent Light Covers | 8 mil backlit film | ASTM E84 / UL 723 | Flame Spread 0, Smoke Developed 20 |
| Magnetic Light Covers | 8 mil backlit film | ASTM E84 / UL 723 | Flame Spread 0, Smoke Developed 20 |
| Fabric Light Covers | Polyester fabric | NFPA 701 Test 1 and Test 2; CAN/ULC-S102.2 | Complies; Flame Spread 0, Smoke 0 |
| Polycarbonate Light Panels | Tuffak GP polycarbonate, 1.5 mm | UL 94 | HB |
What These Fire Standards Mean
Plain-English answers to the questions people search most.
ASTM E84
A tunnel test that measures how far flame spreads across a material and how much smoke it gives off, reported as a Flame Spread Index and a Smoke Developed Index.
UL 723
UL's version of the same tunnel test. ASTM E84 and UL 723 are commonly used interchangeably by code officials.
Class A Range
A Flame Spread Index of 0 to 25 and a Smoke Developed Index up to 450. Class A is the lowest flame spread group used for interior finishes.
NFPA 701
The fire test for textiles and films used in curtains, drapes, and fabric decor. Each specimen must stop burning within 2 seconds and stay under the char length limit.
UL 94 HB
A plastics flammability rating. HB means a horizontal sample burns slowly or self-extinguishes within the limits of the test. It is a rating for the plastic, not a building class.
CAN/ULC-S102.2
Canada's surface burning test, similar to ASTM E84. It reports a Flame Spread Rating and Smoke Developed Classification. Our fabric scored 0 on both.
Safe for Classrooms, Clinics, and Offices
Teachers, therapists, and facility managers use our covers to soften harsh overhead light. In a public building, the first question is almost always fire safety, so every cover we sell has a fire test or rating you can put on file.
Fabric covers are the most popular choice for classrooms and sensory rooms, and the NFPA 701 report covers them. For a rigid, permanent look, choose polycarbonate panels, which replace the diffuser in your fixture.
- Fire test documents for every material
- Fits standard 2x4, 2x2, and 1x4 fixtures
- No tools for film and fabric covers
- Removable for cleaning and inspections
Safe Installation and Care
A few simple habits keep your covers safe and looking good for years.
Before You Install
- Turn off the light and let the fixture cool before you open it or touch the lens.
- Use covers only on LED or fluorescent ceiling fixtures. Do not use them on incandescent or halogen bulbs.
- Never let a cover touch a bulb, LED board, or wiring directly.
- Use a sturdy ladder and keep the fixture door or frame supported while it is open.
Care and Inspection
- Dust film and magnetic covers with a dry microfiber cloth. Do not use liquid cleaners.
- Check covers during routine maintenance and replace any that are torn, warped, or discolored.
- Keep covers clear of sprinkler heads, smoke detectors, and exit signs.
- Keep the test reports from this page with your building's maintenance records.
Fire Ratings for Banners, Flags, and Tents
Our print products are made to order for indoor and outdoor marketing.
Print Products Are Not Sold as Fire Rated
Banners, banner stands, flags, signs, adhesives, posters, tents, and table covers are not sold as fire rated unless the product page says so.
Need Paperwork for an Inspection?
We are happy to help you gather documents for a fire inspection, school district approval, or government purchase order.
Trusted by Schools, Hospitals, and Government
Facilities teams across North America have chosen our light covers.
Fire Safety Documented for Every Light Cover
ASTM E84 / UL 723 Film
NFPA 701 Fabric
UL 94 HB Polycarbonate
Downloadable Reports
Frequently Asked Questions
Answers to the fire safety questions we hear most from teachers, facility managers, and fire marshals.
Are fluorescent light covers a fire hazard?
Not when they are made from a tested material and installed correctly. Our fluorescent light covers use 8 mil backlit film with an ASTM E84 Flame Spread Index of 0 and Smoke Developed Index of 20. Use them only on LED or fluorescent fixtures and keep them from touching bulbs or wiring.
Are fluorescent light covers against fire code?
Fire codes vary by state and building type, and your local fire marshal makes the final call. Many inspectors ask for ASTM E84 or NFPA 701 test results, and we publish both on this page so you can bring them to the inspection.
Are your light covers Class A?
Our backlit film scored a Flame Spread Index of 0 and a Smoke Developed Index of 20 in ASTM E84 testing, which falls inside the Class A range (0 to 25 flame spread, 450 or less smoke). Class A applies to ASTM E84 results only. NFPA 701 is pass or fail, and UL 94 uses its own ratings such as HB.
Are fabric light covers a fire hazard?
Our fabric light covers passed NFPA 701 Test 1 and Test 2 with 0 seconds of afterflame and flaming drip, and scored a Flame Spread Rating of 0 and Smoke Developed Classification of 0 on Canada's CAN/ULC-S102.2 test.
What does UL 94 HB mean for polycarbonate panels?
UL 94 is a flammability rating for plastics. HB means a horizontal sample burns slowly or self-extinguishes within the test limits. Our polycarbonate light panels are made from Tuffak GP sheet, rated UL 94 HB at our 1.5 mm thickness.
Is ASTM E84 the same as UL 723?
They are the same type of tunnel test for surface burning characteristics, and code officials commonly treat them as interchangeable. Our film's test report was run to ASTM E84.
Are light covers safe for classrooms?
Yes, when you choose a tested material. Schools most often choose fabric covers (NFPA 701) or film covers (ASTM E84 / UL 723). See our classroom light covers and share this page with your facilities office.
Do light covers make fixtures overheat?
Our covers are made for LED and fluorescent fixtures, which run much cooler than incandescent or halogen bulbs. Never use them on incandescent or halogen lights, and do not let a cover touch a bulb or LED board.
Can I get the fire test reports for my fire marshal?
Yes. Use the report links in the Fire Test Results section above, or contact us and we will send them to you or your inspector.
Are your banners and tents fire rated?
Our print products, including banners, flags, tents, and table covers, are not sold as fire rated unless the product page says so. If your venue requires fire certified materials, contact us before ordering.
Do you have fire test results for Canada?
Yes. Our fabric light covers were tested to CAN/ULC-S102.2 with a Flame Spread Rating of 0 and Smoke Developed Classification of 0. View the report.
Questions About Fire Safety?
Our team can help you pick the right cover for your building and send the paperwork your inspector needs.